ANE MODEL LC203 Lococruiser DCC HO Standard Decoder (With 21 Pin Socket) 6 Output non-sound IN STOCK.

LC203 LocoCruiser™ Standard decoder Easy to Install：With NMRA 21 pin plug Easy to control：Accept each DCC command station control Easy to Programming：Use separate track to program your locomotive number. Dimensions：Length: 1.1 "(28 mm) Width: 0.6" (15.5 mm) Thickness: 0.2" (5 mm) DCC standard decoder suitable size for HO scale locomotives. Motor current 1.5 Amp continuous and 2 Amp peak Motor overload protect adjustable. 6x 100mA function outputs. Back-EMF with silent motor control 28 step adjustable speed table / Support long address Advanced consist address setting Supports running also in DC environment Function remapping for each output Braking function adjustable CV adjustment instructions CV Function Default Range Record your number in here 1 Primary Address 3 1-127 2 Start Voltage 1 1-255 3 Acceleration 5 0-255 4 Deceleratiom 5 0-255 5 Maximum Speed 0 0-255 6 Medium Speed 0 0-255 7 Version Number 201 Read Only 8 Manufacturer ID 45 Read Only (CV8=8 is reset) 10 EMF Feedback Cutout 128 1-128 11 Packet time-out Value 25 0-255 17 Extended Address Low byte 192 192-231 18 Extended Address High byte 0 0-255 19 Consist address 0 0-255 21 Consist Address Active for F1-F8 0 0-255 22 Consist Address Active for FL and F9-F12 0 0-255 29 Configurations Supported 6 0-255 CV8=8 is reset. It will go back to factory default value for all CV. CV29 Decoder Configuration Bit Function Default Range Record your number in here Bit 0 Locomotive Direction 0 0,1 Bit 1 FL location 2 0,2 Bit 2 14 or 28/128 speed steps 4 0,4 Bit 4 Speed Table 0 0,16 Bit 5 Long address 0 0,32 Adjustable 28 step Speed table CV Function Default 67 Speed Table 1 1 68 Speed Table 2 6 69 Speed Table 3 12 70 Speed Table 4 16 71 Speed Table 5 20 72 Speed Table 6 24 73 Speed Table 7 28 74 Speed Table 8 32 75 Speed Table 9 36 76 Speed Table 10 42 77 Speed Table 11 48 78 Speed Table 12 54 79 Speed Table 13 60 80 Speed Table 14 68 81 Speed Table 15 76 82 Speed Table 16 84 83 Speed Table 17 92 84 Speed Table 18 102 85 Speed Table 19 112 86 Speed Table 20 124 87 Speed Table 21 136 88 Speed Table 22 152 89 Speed Table 23 168 90 Speed Table 24 188 91 Speed Table 25 208 92 Speed Table 26 230 93 Speed Table 27 252 94 Speed Table 28 255 Function output mapping 33 F0F (on/off) 1 1, 2, 4, 8, 16, 32, 128 34 F0R(on/off) 2 35 F1(on/off) 4 36 F2(on/off) 8 37 F3(on/off) 16 38 F4(on/off) 4 This value is different with F1 Value =1 control by F1 Value =2 control by F2 Value =4 control by F3 Value =16 control by F0 Value =128, always light on. Light effect 49 FOF light effect 8 0-255 50 FOR light effect 16 0-255 51 F1 light effect 0 0-255 52 F2 light effect 0 0-255 53 F3 light effect 0 0-255 54 F4 light effect 0 0-255 CV=0 Light on CV=2 Strobe CV=4 Mars Light CV=8 Reverse direction CV=16 Forward direction CV=32 1/4 sec flashing (A) (this two effect design for ditch light) CV=64 1/4 sec flashing (B) CV=36 firebox CV=69 warning light CV=128 1/2 sec flashing Other value always light off These effects can be added together. (See below) When you connect two function outputs to become ditch light, please use CV=32 and CV64 in different output. It will become a ditch light with a prototypical flashing effect. Special function Function Function Key CV Default value Motor braking F7 63 5 Motor overload protect --- 64 60 (1.2 Amp) CV63 adjust motor braking time CV64 adjust motor overload amp Wiring The decoder is supplied with an 21-pin DCC plug. If your loco has the DCC-standard socket, plug the pins into the socket according to the marks on the decoder and those of the circuit board of the locomotive. If your loco does not have the DCC standard medium socket. Please choose our decoder version without 8 pin plug. It will explain to you how to hard wire it into the locomotive properly. We have a special design for modeller function output. You can connect LED directly to F1~F4 function output. It will save having to add extra resistors. You can get more installation detail and description about this decoder on the ANE website - www.anemodel.com. Warranty & Repair Information At ANE Model we value our customers. Customer satisfaction is our primary goal. This is why every decoder has been tried and tested thoroughly. ANE Model will also replace any control board free within 90 days after purchase if there are any problems. Please see our website www.anemodel.com for more information about warranty and repair policies and procedures. At ANE Model's sole discretion, it will repair, replace or refund the purchase price. In the event, that ANE Model products are not installed or used in accordance with the manufacturer’s specifications, any and all warranties either expressed or implied are void. Except to the extent expressly stated above in this section, there are no warranties, express or implied, including but not limited to any warranties of merchantability or fitness for a particular purpose. ANE Model Co., Ltd. reserves the right to make changes in design and specifications, and/or to make additions or improvements in its products without impose any obligations upon itself to install these changes, additions or improvements on product previously manufactured

WE ARE PROUD TO MAKE AVAILABLE TO THE AUSTARILAN RAILWAY MODELLERS THE NEW STARTER LEVEL DCC COMMAND CONTROL STATION THAT WILL ALSO GIVE THOSE THAT RUN DC LAYOUTS AND WANT TO START DCC RUNNING WITH OUT THE HIGH COST OF A DCC CONTROLLERS THE LD101 DCC / DC DUAL-MODE COMMAND STATION 15 VOLTS 4 AMPS.  

MADE IN TAWIAN BY ANE MODELS DISTRIBUTED BY CASULA HOBBIES TRADE INQUIRIES WELCOMED. 

1. MORE ITEMS FROM ANE MODEL TO COME.