Eureka AD60 Garrett - 6029 - BLACK no lining - DCC Sound - As preserved – NSW Trans. Heritage. Has NSW Transport Heritage name boards. NOT WEATHERED

Picture not exact model, ALL AD60 MODELS ARE NOT WEATHERED. 

Casula Hobbies                                                                                                                              January 2026.

The EUREKA 3^rd run AD60 Garrett

Before removing the model from there cradles use a black marker to help make it easy to re-pack the model back in the cradles.

1.      Mark where the steam cylinders are on the two tenders so that you place exactly back were they belong without pushing and prodding to find the correct spot, this stops you from pushing the steps off.

2.      Mark the front and back of each of the models also.

To remove the three of the models from the cradle open and fold back the top then lifts the model strength up and out.

 Most important for the two tenders as it is very easy to knock off the two front red steps, if they have come off and are in the box they will clip back in place but note there is one for the right driver side end and one for the left fireman’s side.

Thay are different for both sides, the left-hand side (fireman’s) has a detail item at protrudes from left of the step and the right-hand side (driver’s) is strength up and down on both sides off it and by brushing on a small amount of plastic glue behind the step will keep them on.

Yours modelling the Railways of NSW.

Joe Callipari MLO            Casula Hobbies est 1975