PowerFilter DCC-PF by ContorlIt

controlIt

$9.50 
SKU: DCC-PF

DCC-PF:  ControlIt PowerFilters help preserve and protect the DCC signal and voltage levels on model train layouts. See below. 

PowerFilter Installation Diagrams

ControlIt PowerFilters (also known as DCC snubbers or DCC terminators) are designed for use on layouts of any size and scale with systems that conform to the NMRA DCC specifications and standards. PowerFilters maintain the integrity of the DCC signal along the length of a DCC power bus by filtering out unwanted frequencies, noise and voltage spikes.

ControlIt PowerFilters are suitable for all layouts and are highly recommended for DCC power bus lengths longer than 10 metres (30 feet) or where DCC systems of 6 Amps or higher current are used.

ControlIt PowerFilters can especially assist if you have experienced:

  • Intermittent loss of control or lack of immediate response when operating locomotives
  • Locomotive runaways
  • DCC decoders losing their programmed configuration
  • DCC decoders being destroyed

PowerFilters are easy to install with 3mm (1/8") mounting holes and four screw terminals for wiring - two for each rail. The terminals accomodate wire from 0.4mm (26AWG) to 2mm (12AWG) diameter. See the diagrams below for suitable wiring installations.

Installation Recommendations

  • Start with installing a PowerFilter at the end of a DCC power bus furthest away from the command station or booster
  • If issues are still being experienced in certain areas of the layout, additional PowerFilters can be added at those areas along the power bus
  • For layouts fitted with current sensing train detectors, any PowerFilters must be installed before the detectors (ie: not between the detector and the track)

Note: A PowerFilter may become warm and may make a slight buzzing sound heard at very close range during the course of normal operation.

ControlIt PowerFilter

 

Our brands